Dos For Mac
2021年7月3日Download here: http://gg.gg/v87e3
For long time users of the Apple Macintosh, the DOS environment might appear confusing at first. It helps to have experience with the System Terminal and the Command Line. Once set up however a simple shortcut will be all you need.
Enjoy 3 years of peace of mind when you buy AppleCare+ for Mac. Every Mac comes with one year of hardware repair coverage through its limited warranty and up to 90 days of complimentary technical support.AppleCare+ for Mac extends your coverage to three years from your AppleCare+ purchase date and adds up to two incidents of accidental damage protection every 12 months, each subject to a.Installing
This guide will use the 0.74 Mac OSX version which is available for download. The 0.74 release is compiled as a Universal Binary, and will run on PowerPC and Intel based Macs. To install DOSBox, first expand the .ZIP file and copy the contents into a folder like DOSBox. Move this folder into your Applications folder.
This can be used to get mac address for remote computers also. Below are few examples on how to use this command. It works on XP, Vista, Windows 7, Server 2003 and Server 2008 operating systems. Get mac addresses from CMD. Just run the command getmac to get the mac. Use this method to obtain the MAC Address of your local computer as well as query remotely by computer name or IP Address. Hold down the “Windows Key” and press “R“. Type “CMD“, then press “Enter“. You can use one of the following commands. While macOS is not well-known for gaming, you can still play DOS games on your Mac. Learn how to play DOS games on macOS with DOSBox, the leading DOS emulator on any platform. Note: for Windows and Linux users, these are instructions are for playing old DOS games on Windows and Linux. Download the latest version of DOSBox for Mac. MS-DOS through this emulator. With DOSBox, an emulator for the DOS operating system, you can execute programs.
Now you need to create a folder to MOUNT as your C: drive and hold your games. The most convenient location for this folder would be your home folder (which can be referenced as ~). In This example we will call our folder DOSGAMES. Inside this folder we can place all of the programs that we want to be available in our emulated DOS environment. Remember that while these files are buried deep in the file system with paths like ~/DOSGAMES/TESTDRV, inside DOSBox they appear as though they reside in the root of their mounted drive letter, so the above example in DOSBox would be located at C:TESTDRV (assuming that ~/DOSGAMES was mounted as C:).Running DOSBox for the first time
Double click on the DOSBox icon in Finder to launch DOSBox for the first time. This will cause the DOSBox window to appear. By default no drives are mounted (except the DOSBox default Z:) From here you need to mount your DOSGAMES folder. Assuming you placed it inside your home folder you should be able to run this command to MOUNT the folder.
Now type this command to navigate to your newly mounted driveEditing DOSBox preferences
After you first run DOSBox, go to the ~/Library/Preferences/ folder and open the newly created file DOSBox 0.74 Preferences. The exact folder name in the Finder may vary, depending on the language you use for OS X.
By editing this file, you can set the system settings and initialization values that define your emulated environment. You can also add MOUNT commands to the AUTOEXECsection at the bottom of the configuration files, so that you do not have to type them in every time you start DOSBox.Running DOSBox with custom config
You can create configuration file for individual games. It can hold specific configuration options and even commands for invoking game in the AUTOEXEC section. Then you can run DOSBox with your config by calling following command from terminal:
Akvis sketch for mac torrent. Versions for Windows and Mac. Download AKVIS Software for image processing and photo restoration. Versions for Windows and Mac. AKVIS Sketch Video 5.0. Sketch Video Plugin 5.0 — Win 64-bit. Version Change List (txt) Photo Processing Video Processing. Photo Processing (Mac OS X 10.10-10.11, macOS 10.12-10.15. AKVIS Sketch 23.0.3437.19202 Crack + License Key Download 2020. AKVIS Sketch Crack Plus Activation Key is a program that lets you show simple pictures into black and white drawings. It can approach of drawing with graphite and coloration pencils, watercolor, and charcoal.Retrieved from ’https://www.dosbox.com/wiki/index.php?title=DOSBox_and_Mac_OS_X&oldid=134467’NOTE:Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the built in smart card ability (very bottom of macuninstall link above)If you purchased your Mac with OS Catalina (10.15.x) already installed, you can skip the uninstall part above and follow the instructions below. 6 ’high level’ steps needed, follow down the page to make this a painless systematic process1.Is your CAC reader ’Mac friendly’?2.Can your Mac ’see’ the reader?3.Verify which version of Mac OS you have4.Figure out which CAC (ID card) you have5.Install the DoD certificates5a.Additional DoD certificate installation instructions for Firefox users6.Decide which CAC enabler you want to use (except for 10.12-.15)
Step 1: Is your CAC reader Mac friendly?
Visit the USB Readers page to verify the CAC reader you have is Mac friendly.
Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.
’Some, not all’ CAC readers may need to have a driver installed to make it work.
NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).
Information about these specific readers are in Step 2
Step 2: Can your Mac ’see’ the reader?Plug the CAC reader into an open USB port before proceeding, give it a few moments to install
Step 2a: Click the Apple Icon in the upper left corner of the desktop, select ’About This Mac’
Step 2b: Click ’System Report..’ (button)
Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.
Step 2c1: Verify firmware version on your SCR-331 or GSR-202, 202V, 203 CAC, or SCR-3500a reader. If you have a reader other than these 5, Proceed directly to step 3
Step 2c1a-SCR-331 reader
If your reader does not look like this, go to the next step.
In the ’Hardware’ drop down, click ’USB.’ On the right side of the screen under ’USB Device Tree’ the window will display all hardware plugged into the USB ports on your Mac. Look for “SCRx31 USB Smart Card Reader.” If the Smart Card reader is present, look at ’Version’ in the lower right corner of this box: If you have a number below 5.25, you need to update your firmware to 5.25. If you are already at 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.
Step 2c1b-SCR-3500A reader
If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open
Step 3: Verify which version of MacOS do you have?
(You need to know this information for step 6)
Step 3a: Click the Apple Icon in the upper left corner of your desktop and select ’About This Mac’
Step 3b: Look below Mac OS X for: Example: Version 10.X.X.
Step 4: Figure out which CAC (ID Card) you have
(You need to know this information for step 6)
Look at the top back of your ID card for these card types. If you have any version other than the six shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.
Find out how to flip card over video
Step 5: Install the DoD certificates (for Safari and Chrome Users)
Go to Keychain Access Click: Go (top of screen), Utilities, double click Keychain Access.app Mac Dos Emulator
(You can also type: keychain access using Spotlight (this is my preferred method)) Select login (under Keychains),and All Items (under Category).
Download the 5 files via links below (you may need to <ctrl> click, select Download Linked File As.. on each link) Save to your downloads folder
Please know.. IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.
https://militarycac.com/maccerts/AllCerts.p7b,
https://militarycac.com/maccerts/RootCert2.cer,
https://militarycac.com/maccerts/RootCert3.cer,
https://militarycac.com/maccerts/RootCert4.cer, and
Double click each of the files to install certificates into the login section of keychain
Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:
DOD EMAIL CA-33 through DOD EMAIL CA-34,
DOD EMAIL CA-39 through DOD EMAIL CA-44,
DOD EMAIL CA-49 through DOD EMAIL CA-52,
DOD EMAIL CA-59,
DOD ID CA-33 through DOD ID CA-34,
DOD ID CA-39 through DOD ID CA-44,
DOD ID CA-49 through DOD ID CA-52,
DOD ID CA-59Dose For Macrobid
DOD ID SW CA-35 through DOD ID SW CA-38,
DOD ID SW CA-45 through DOD ID SW CA-48,
DoD Root CA 2 through DoD Root CA 5,
DOD SW CA-53 through DOD SW CA-58, and
Half life download for mac. DOD SW CA-60 through DOD SW CA-61
NOTE: If you are missing any of the above certificates, you have 2 choices,
1. Delete all of them, and re-run the 5 files above, or
2. Download the allcerts.zip file and install each of the certificates you are missing individually.
Errors:
Error 100001 Solution
Error 100013 Solution
You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates
You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates
Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.
You may be prompted to enter computer password when you close the window
Nikon coolpix driver windows 7. Once you select Always Trust, your icon will have a light blue circle with a white + on it.
The ’bad certs’ that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.
The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x or DoD Interoperability Root CA 1 or CA 2 certificate DoD Root CA 2 or 3 (light blue frame ONLY) certificate or Federal Bridge CA 2016 or 2013 certificate or Federal Common Policy CAcertificate or or SHA-1 Federal Root CA G2 certificate or US DoD CCEB Interoperability Root CA 1 certificate
If you have tried accessing CAC enabled sites prior to following these instructions, please go through this page before proceeding
Clearing the keychain (opens a new page)
Please come back to this page to continue installation instructions.
Step 5a: DoD certificate installation instructions for Firefox users
NOTE: Firefox will not work on Catalina (10.15.x), or last 4 versions of Mac OS if using the native Apple smartcard ability
Download AllCerts.zip, [remember where you save it].Dos Emulator For Mac
double click the allcerts.zip file (it’ll automatically extract into a new folder)
Option 1 to install the certificates (semi automated):
From inside the AllCerts extracted folder, select all of the certificates
<control> click (or Right click) the selected certificates, select Open With, Other..
In the Enable (selection box), change to All Applications
Select Firefox, then Open
You will see several dozen browser tabs open up, let it open as many as it wants.
You will eventually start seeing either of the 2 messages shown next
If the certificate is not already in Firefox, a window will pop up stating ’You have been asked to trust a new Certificate Authority (CA).’
Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers
or
’Alert This certificate is already installed as a certificate authority.’ Click OK
Once you’ve added all of the certificates..
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it
Option 2 to install the certificates (very tedious manual):
Click Firefox (word) (upper left of your screen)
Preferences
Advanced (tab on left side of screen)
Certificates (tab)
View Certificates (button)
Authorities (tab)
Import (button)
Browse to the DoD certificates (AllCerts) extracted folder you downloaded and extracted above.
Note: You have to do this step for every single certificate
Note2: If the certificate is already in Firefox, a window will pop up stating: ’Alert This certificate is already installed as a certificate authority (CA).’ Click OK
Note3: If the certificate is not already in Firefox, a window will pop up stating ’You have been asked to trust a new Certificate Authority (CA).’
Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers
Once you’ve added all of the certificates..
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it
Step 6: Decide which CAC enabler you can / want to use
Only for Mac El Capitan (10.11.x or older)
After installing the CAC enabler, restart the computer and go to a CAC enabled website
NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x) or Catalina (10.15.x) computers no longer need a CAC Enabler.
Try to access the CAC enabled site you need to access now
Mac support provided by: Michael Danberry
Download here: http://gg.gg/v87e3
https://diarynote.indered.space
For long time users of the Apple Macintosh, the DOS environment might appear confusing at first. It helps to have experience with the System Terminal and the Command Line. Once set up however a simple shortcut will be all you need.
Enjoy 3 years of peace of mind when you buy AppleCare+ for Mac. Every Mac comes with one year of hardware repair coverage through its limited warranty and up to 90 days of complimentary technical support.AppleCare+ for Mac extends your coverage to three years from your AppleCare+ purchase date and adds up to two incidents of accidental damage protection every 12 months, each subject to a.Installing
This guide will use the 0.74 Mac OSX version which is available for download. The 0.74 release is compiled as a Universal Binary, and will run on PowerPC and Intel based Macs. To install DOSBox, first expand the .ZIP file and copy the contents into a folder like DOSBox. Move this folder into your Applications folder.
This can be used to get mac address for remote computers also. Below are few examples on how to use this command. It works on XP, Vista, Windows 7, Server 2003 and Server 2008 operating systems. Get mac addresses from CMD. Just run the command getmac to get the mac. Use this method to obtain the MAC Address of your local computer as well as query remotely by computer name or IP Address. Hold down the “Windows Key” and press “R“. Type “CMD“, then press “Enter“. You can use one of the following commands. While macOS is not well-known for gaming, you can still play DOS games on your Mac. Learn how to play DOS games on macOS with DOSBox, the leading DOS emulator on any platform. Note: for Windows and Linux users, these are instructions are for playing old DOS games on Windows and Linux. Download the latest version of DOSBox for Mac. MS-DOS through this emulator. With DOSBox, an emulator for the DOS operating system, you can execute programs.
Now you need to create a folder to MOUNT as your C: drive and hold your games. The most convenient location for this folder would be your home folder (which can be referenced as ~). In This example we will call our folder DOSGAMES. Inside this folder we can place all of the programs that we want to be available in our emulated DOS environment. Remember that while these files are buried deep in the file system with paths like ~/DOSGAMES/TESTDRV, inside DOSBox they appear as though they reside in the root of their mounted drive letter, so the above example in DOSBox would be located at C:TESTDRV (assuming that ~/DOSGAMES was mounted as C:).Running DOSBox for the first time
Double click on the DOSBox icon in Finder to launch DOSBox for the first time. This will cause the DOSBox window to appear. By default no drives are mounted (except the DOSBox default Z:) From here you need to mount your DOSGAMES folder. Assuming you placed it inside your home folder you should be able to run this command to MOUNT the folder.
Now type this command to navigate to your newly mounted driveEditing DOSBox preferences
After you first run DOSBox, go to the ~/Library/Preferences/ folder and open the newly created file DOSBox 0.74 Preferences. The exact folder name in the Finder may vary, depending on the language you use for OS X.
By editing this file, you can set the system settings and initialization values that define your emulated environment. You can also add MOUNT commands to the AUTOEXECsection at the bottom of the configuration files, so that you do not have to type them in every time you start DOSBox.Running DOSBox with custom config
You can create configuration file for individual games. It can hold specific configuration options and even commands for invoking game in the AUTOEXEC section. Then you can run DOSBox with your config by calling following command from terminal:
Akvis sketch for mac torrent. Versions for Windows and Mac. Download AKVIS Software for image processing and photo restoration. Versions for Windows and Mac. AKVIS Sketch Video 5.0. Sketch Video Plugin 5.0 — Win 64-bit. Version Change List (txt) Photo Processing Video Processing. Photo Processing (Mac OS X 10.10-10.11, macOS 10.12-10.15. AKVIS Sketch 23.0.3437.19202 Crack + License Key Download 2020. AKVIS Sketch Crack Plus Activation Key is a program that lets you show simple pictures into black and white drawings. It can approach of drawing with graphite and coloration pencils, watercolor, and charcoal.Retrieved from ’https://www.dosbox.com/wiki/index.php?title=DOSBox_and_Mac_OS_X&oldid=134467’NOTE:Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the built in smart card ability (very bottom of macuninstall link above)If you purchased your Mac with OS Catalina (10.15.x) already installed, you can skip the uninstall part above and follow the instructions below. 6 ’high level’ steps needed, follow down the page to make this a painless systematic process1.Is your CAC reader ’Mac friendly’?2.Can your Mac ’see’ the reader?3.Verify which version of Mac OS you have4.Figure out which CAC (ID card) you have5.Install the DoD certificates5a.Additional DoD certificate installation instructions for Firefox users6.Decide which CAC enabler you want to use (except for 10.12-.15)
Step 1: Is your CAC reader Mac friendly?
Visit the USB Readers page to verify the CAC reader you have is Mac friendly.
Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.
’Some, not all’ CAC readers may need to have a driver installed to make it work.
NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).
Information about these specific readers are in Step 2
Step 2: Can your Mac ’see’ the reader?Plug the CAC reader into an open USB port before proceeding, give it a few moments to install
Step 2a: Click the Apple Icon in the upper left corner of the desktop, select ’About This Mac’
Step 2b: Click ’System Report..’ (button)
Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.
Step 2c1: Verify firmware version on your SCR-331 or GSR-202, 202V, 203 CAC, or SCR-3500a reader. If you have a reader other than these 5, Proceed directly to step 3
Step 2c1a-SCR-331 reader
If your reader does not look like this, go to the next step.
In the ’Hardware’ drop down, click ’USB.’ On the right side of the screen under ’USB Device Tree’ the window will display all hardware plugged into the USB ports on your Mac. Look for “SCRx31 USB Smart Card Reader.” If the Smart Card reader is present, look at ’Version’ in the lower right corner of this box: If you have a number below 5.25, you need to update your firmware to 5.25. If you are already at 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.
Step 2c1b-SCR-3500A reader
If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open
Step 3: Verify which version of MacOS do you have?
(You need to know this information for step 6)
Step 3a: Click the Apple Icon in the upper left corner of your desktop and select ’About This Mac’
Step 3b: Look below Mac OS X for: Example: Version 10.X.X.
Step 4: Figure out which CAC (ID Card) you have
(You need to know this information for step 6)
Look at the top back of your ID card for these card types. If you have any version other than the six shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.
Find out how to flip card over video
Step 5: Install the DoD certificates (for Safari and Chrome Users)
Go to Keychain Access Click: Go (top of screen), Utilities, double click Keychain Access.app Mac Dos Emulator
(You can also type: keychain access using Spotlight (this is my preferred method)) Select login (under Keychains),and All Items (under Category).
Download the 5 files via links below (you may need to <ctrl> click, select Download Linked File As.. on each link) Save to your downloads folder
Please know.. IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.
https://militarycac.com/maccerts/AllCerts.p7b,
https://militarycac.com/maccerts/RootCert2.cer,
https://militarycac.com/maccerts/RootCert3.cer,
https://militarycac.com/maccerts/RootCert4.cer, and
Double click each of the files to install certificates into the login section of keychain
Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:
DOD EMAIL CA-33 through DOD EMAIL CA-34,
DOD EMAIL CA-39 through DOD EMAIL CA-44,
DOD EMAIL CA-49 through DOD EMAIL CA-52,
DOD EMAIL CA-59,
DOD ID CA-33 through DOD ID CA-34,
DOD ID CA-39 through DOD ID CA-44,
DOD ID CA-49 through DOD ID CA-52,
DOD ID CA-59Dose For Macrobid
DOD ID SW CA-35 through DOD ID SW CA-38,
DOD ID SW CA-45 through DOD ID SW CA-48,
DoD Root CA 2 through DoD Root CA 5,
DOD SW CA-53 through DOD SW CA-58, and
Half life download for mac. DOD SW CA-60 through DOD SW CA-61
NOTE: If you are missing any of the above certificates, you have 2 choices,
1. Delete all of them, and re-run the 5 files above, or
2. Download the allcerts.zip file and install each of the certificates you are missing individually.
Errors:
Error 100001 Solution
Error 100013 Solution
You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates
You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates
Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.
You may be prompted to enter computer password when you close the window
Nikon coolpix driver windows 7. Once you select Always Trust, your icon will have a light blue circle with a white + on it.
The ’bad certs’ that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.
The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x or DoD Interoperability Root CA 1 or CA 2 certificate DoD Root CA 2 or 3 (light blue frame ONLY) certificate or Federal Bridge CA 2016 or 2013 certificate or Federal Common Policy CAcertificate or or SHA-1 Federal Root CA G2 certificate or US DoD CCEB Interoperability Root CA 1 certificate
If you have tried accessing CAC enabled sites prior to following these instructions, please go through this page before proceeding
Clearing the keychain (opens a new page)
Please come back to this page to continue installation instructions.
Step 5a: DoD certificate installation instructions for Firefox users
NOTE: Firefox will not work on Catalina (10.15.x), or last 4 versions of Mac OS if using the native Apple smartcard ability
Download AllCerts.zip, [remember where you save it].Dos Emulator For Mac
double click the allcerts.zip file (it’ll automatically extract into a new folder)
Option 1 to install the certificates (semi automated):
From inside the AllCerts extracted folder, select all of the certificates
<control> click (or Right click) the selected certificates, select Open With, Other..
In the Enable (selection box), change to All Applications
Select Firefox, then Open
You will see several dozen browser tabs open up, let it open as many as it wants.
You will eventually start seeing either of the 2 messages shown next
If the certificate is not already in Firefox, a window will pop up stating ’You have been asked to trust a new Certificate Authority (CA).’
Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers
or
’Alert This certificate is already installed as a certificate authority.’ Click OK
Once you’ve added all of the certificates..
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it
Option 2 to install the certificates (very tedious manual):
Click Firefox (word) (upper left of your screen)
Preferences
Advanced (tab on left side of screen)
Certificates (tab)
View Certificates (button)
Authorities (tab)
Import (button)
Browse to the DoD certificates (AllCerts) extracted folder you downloaded and extracted above.
Note: You have to do this step for every single certificate
Note2: If the certificate is already in Firefox, a window will pop up stating: ’Alert This certificate is already installed as a certificate authority (CA).’ Click OK
Note3: If the certificate is not already in Firefox, a window will pop up stating ’You have been asked to trust a new Certificate Authority (CA).’
Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers
Once you’ve added all of the certificates..
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it
Step 6: Decide which CAC enabler you can / want to use
Only for Mac El Capitan (10.11.x or older)
After installing the CAC enabler, restart the computer and go to a CAC enabled website
NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x) or Catalina (10.15.x) computers no longer need a CAC Enabler.
Try to access the CAC enabled site you need to access now
Mac support provided by: Michael Danberry
Download here: http://gg.gg/v87e3
https://diarynote.indered.space
コメント